The peripherals for marco micro dispensing solutions
Our peripheral control and operating units network the modules together. Fully integrable into any of our partners' systems, these computers can take on various tasks. From the simple programming of a valve to real-time applications with the StepDot, our modules provide the necessary computing power.
MultiJet
marco MultiJet systems combine high-precision dispensing technology with the requirements of mass production. By combining up to eight marco sJet valves, material can be applied quickly, over a large area and with micrometer precision. The in-house VisTwo software enables real-time control. The valve offset can be individually adjusted using the valve fixation on rails and the micrometer adjustment screws. In conjunction with the real-time control, the MultiJet systems can apply complex print patterns with frequencies of up to 1000 Hz. Heating elements in the media supply, staggered in several heating circuits, ensure a constant temperature material flow. Together with the marco products for media supply, this results in reliable and powerful dispensing systems. The specialists at macro enable adaptation to individual requirements, regardless of the number of valves, media supply or software solutions.
Advantages: large-area material application, material offset
Two-component mixing head
Dispensing systems from marco with a two-component mixing head combine a two-component mixing device with the flexibility of a dispensing head. Where previously two process steps were necessary to produce a mixed medium and distribute it on the workpiece, with this system the medium can be mixed directly before dispensing. The attached stepper motors generate a high-precision mixing ratio with a tolerance of less than 0.5% by volume. Hardening of the mixed medium in the machine or tubing is prevented. Only the mixing helix in contact with the mixed material needs to be replaced. In addition, marco offers a dynamic mixer with a separate motor. They are clearly superior to static mixers for applications with large differences in the mixing ratio or with high demands on homogeneity. Specially developed modular mixing spirals produce homogeneously mixed dispensing results. An automatic changeover mechanism is also possible. This allows the degree of automation to be increased even further.
Advantages: Process optimization, high flexibility,
ax4
In production, dosing points often have to be approached via complicated routes or are not easy to reach vertically. marco has developed the dispensing system ax4 for such special requirements in terms of dispensing angle and direction of rotation. Equipped with a 360 degree rotating dispensing valve, whose dosing angle can be tilted between 0 degrees (vertical) and 45 degrees, ax4 can reach almost any dosing point. The rotary movement is generated by a stepper motor and two Hall sensors ensure precise positioning. The media cartridge is attached to dispensing valve . This means that only compressed air and electricity need to be connected via the rotary transfer.
Advantages: individual dispensing angles, individual dispensing direction
The best thing is to ask marco in person!
The peripherals for marco's dispensing solutions are wide-ranging. We develop even highly complex environments. Your guarantee for productive progress in production.
You have requirements - we think your solution. That's where we are strong. Our employees are researchers, tinkerers, developers and technicians. What they all have in common is their enthusiasm for highly specialised plant and mechanical engineering, automation and software development.
Phone: +88 (0) 101 0000 000
Fax: +88 (0) 202 0000 001J